M-Tec Monomix - 3 Phase
The M-tec Mono-mix -&edsp;&edsp;The Mono-mix is a compact, easy-to-use mixing pump and is perfectly suited to the processing of all machine-mixable interior and exterior plasters, as well as for adhesives and reinforcing mortar. The mono-mix can be used both with bagged material as well as soft materials. The pump has four convenient output settings, enabling it to be adjusted to the relevant material. An optional after mixer is available for materials that are difficult to mix.&edsp;

The transparent layout of the controls and the conscious avoidance of superfluous switches make for simple operation.
The large wheels mean that the mixer can be transported with ease at all times. In addition, the mono-mix can be dismantled into three trouble-free components on the building site in just a few simple steps.&edsp;

As is typical of all m-tec systems, the mono-mix has easy and quick to use tensioning wedges, enabling important elements such as the worm pump or material container to be replaced in just a few seconds.

mono-mix - added benefits
Easy Work
The powerful drive technology of the mono-mix ensures there is always enough power for challenging tasks, even in the 230 Volt version.
&edsp;

&edsp;
&edsp;
Easy Use
Together, clearly structured controls, 3-way dismantling, easy transport by crane and large wheels make the mono-mix easy to handle.&edsp;
Easy Clean
The simple but logical structure enables the mono-mix to be cleaned quickly.

Mono-mix – facts
Areas of use and applications
All pumpable dry mortars, such as:
Gypsum plasters
Lime gypsum plasters
Cement plasters
&edsp;
Lime plasters
Lime cement plasters
Insulating plasters
Finishing plasters
Plaster for restoration
Reinforcing mortar and adhesive mortar
Floor screeds
Levelling Compound
Specifications
&edsp;&edsp;mono-mix-FU&edsp;&edsp;mono-mix&edsp;
Standard output:&edsp;

variable with other worm pumps

&edsp;&edsp;5 – 20 l/min *&edsp;&edsp;&edsp;22 l/min *
&edsp;Conveying distance:&edsp;&edsp;up to 20 m *&edsp;&edsp;up to 20 m *
&edsp;Conveying height:&edsp;&edsp;&edsp;up to 20 m *&edsp;&edsp;up to 20 m *
&edsp;Conveying pressure:&edsp;&edsp;up to 20 bar *&edsp;&edsp;up to 40 bar *
&edsp;Drive motor:&edsp;&edsp;3.0 kW&edsp;&edsp;&edsp;&edsp;5.5 kW&edsp;
&edsp;Compressed air supply:&edsp;&edsp;&edsp;1.1 kW, approx. 250 l/min, 4 bar&edsp;&edsp;&edsp;&edsp;0.9 kW, approx. 250 l/min, 4 bar&edsp;
&edsp;Electrical connection:&edsp;&edsp;&edsp;230 V , 50 Hz, 1 ph&edsp;&edsp;&edsp;&edsp;400 V, 50 Hz,&edsp;&edsp;3 ph&edsp;
&edsp;Fuses:&edsp;&edsp;16 A&edsp;&edsp;25 A&edsp;
&edsp;Connecting cable:&edsp;&edsp;&edsp;&edsp;3 x 2.5 mm²&edsp;&edsp;&edsp;5 x 2.5 mm²&edsp;
&edsp;Water supply:&edsp;&edsp;&edsp;3/4“ water hose with GEKA coupling, required water pressure min. 2.5 bar while the machine is running&edsp;
&edsp;Connector:&edsp;&edsp;16 A 3 P 6 h&edsp;&edsp;16 A 5 P 6 h
&edsp;Dimensions:&edsp;
&edsp;approx. 1430 x 670 x 1,150 mm&edsp;

&edsp;Weight:&edsp;&edsp;&edsp;approx. 160kg&edsp;&edsp;
&edsp;
&edsp;
* Depending on&edsp;&edsp;consistency, quality and composition of the material, pump model - and condition, diameter and length of the delivery hose and also the pumping height of the material.

Write a review

Note: HTML is not translated!
    Bad           Good

M-Tec Monomix - 3 Phase

 
  • Price: £6,480.00 inc VAT Model No: SKU2179
  • Price: £5,400.00 ex VAT
 
  • The M-tec Mono-mix -&edsp;&edsp;The Mono-mix is a compact, easy-to-use mixing pump and is perfectly suited to the processing of all machine-mixable interior and exterior plasters, as well as for adhesives and reinforcing mortar. The mono-mix can be u...
 
  • Views: 10518
  • Brand: M-Tec
  • Availability: Out of Stock