AR1 GG Adhesive Grey

Mapetherm AR1 GG; a grey adhesive/base coat for use with external wall insulation. A grey  powder made from cement, selected sand, synthetic resin and special additives with a fine grain size of up to 0.6 mm.


WHERE TO USE:

  • Bonding all types of thermal-insulating panels (foam/extruded polystyrene, foam polystyrene, mineral fibres, cork, wood fibres, etc.) directly on render, masonry and concrete on walls and ceilings.
  • Smoothing thermal-insulating panels with embedded fibreglass reinforcing mesh on internal and external walls (thermal insulation system).

Some application examples:

Bonding and smoothing internal and external heat-insulating panels and thermal insulation systems on:

  • Cementitious render or lime-mortar render;
  • Concrete;
  • Concrete blocks;
  • Brick blocks.

Also suitable for bonding and smoothing systems for:

  • Insulating inside faces of walls in rooms above ground;
  • Insulating inside faces of retaining walls in basements;
  • Insulating inside faces of loft ceilings;
  • Insulating external faces of ventilated façades.


TECHNICAL CHARACTERISTICS:

Mapetherm AR1 GG is a grey or white powder made from cement, selected sand, synthetic resin and special additives with a fine grain size of up to 0.6 mm, developed according to a formula developed in MAPEI’s own research laboratories. When mixed with water, it forms a mortar with the following characteristics:

  • Low viscosity and, therefore, good workability;
  • High thixotropic consistency: Mapetherm AR1 GG may be applied on vertical surfaces without running and without the risk of insulating panels slipping, including large sized panels;
  • Bonds perfectly to all materials normally used in the building industry;
  • Hardens without shrinking.
Coverage as adhesive: 5m2

Write a review

Note: HTML is not translated!
    Bad           Good

AR1 GG Datasheet

Click to download PDF

AR1 GG Adhesive Grey

 
  • Price: £15.29 inc VAT Model No: SKU2427
  • Price: £12.74 ex VAT
 
  • Mapetherm AR1 GG; a grey adhesive/base coat for use with external wall insulation. A grey  powder made from cement, selected sand, synthetic resin and special additives with a fine grain size of up to 0.6 mm.WHERE TO USE:Bonding all types of the...
 
  • Views: 1091
  • Brand: Mapei
  • Availability: Out of Stock